Glass coating cleaning agent
Scope of application: Used for surface cleaning of vacuum coating, mobile phone glass, optical glass lenses, etc.
Product Introduction
The glass coating cleaning agent is produced using high-quality raw materials and advanced technology, which has no corrosion on the glass surface and does not damage the substrate. It has a strong cleaning effect on particles, powder layers, other metal compounds, fingerprints, oil stains and other dirt on the surface before and after glass coating (such as AR film, AF film, AG film, etc.). It is suitable for cleaning various glass coatings, has no adverse effects on the surface conductive film layer, strong cleaning ability, high cleaning rate, no residue, and is easy to rinse. This product contains anti-static agents, which can prevent dust and other back adsorption phenomena after cleaning.
Scope of application: Used for surface cleaning of vacuum coating, mobile phone glass, optical glass lenses, etc.
Product Feature
| √ Especially effective for cerium oxide polishing powder, with high cleanliness |
| √ No scratches, watermarks, or white spots after cleaning |
| √ The tank liquid has a long service life and will not return to dirt or dirt |
| √ Protect the glass from discoloration, dullness, and damage to the film layer |
| √ Water based safety, low foam type, easy to rinse, no residue |
| √ Meets VOC, COD, and EU RoHS requirements |
Quick to clean, non corrosive, easy to rinse, environmentally friendly, odorless, and not harmful to hands
Physical and chemical indicators
| Appearance | Colorless to slightly yellow liquid | Density | 1.04～1.06g/L |
| PH | 3-5 or 6-9 or 11-13(working fluid) | Secure | Non combustible non corrosive |
| Environmental protection | Phosphorus free, halogen-free, compliant with EU RoHS requirements | ||
Process Flow
Precautions for use
USAGE
Constant temperature immersion cleaning or ultrasonic cleaning
USAGE METHOD
Dilute in proportion to the working solution, heat to 50-60 degrees, soak at a constant temperature for 5-10 minutes, or clean with ultrasound for 2-3 minutes.For heavy oil contaminated workpieces, extend the cleaning time or use multiple grooves to thoroughly clean them.
MAINTENANCE
1. Regularly check the temperature and liquid level of the tank liquid, replenish water in a timely manner, and add the corresponding proportion of the original liquid.
2. Regularly replace the tank liquid according to the specified time.